How To Maintain Unfinished Wood Flooring

Unfinished wood flooring is a popular option with certain men and women who prefer to retain timber in its natural state. But in regards to upkeep, the absence of the likes of a lacquer or an oil end does mean which you will need to be respectful of your flooring than you might otherwise need to be.

In order to assist those of you who’ve chosen to leave your floor bare, we have assembled this guide. You’ll see very quickly when you read it that in many ways, in regards to keeping unfinished hardwood floors it’s more about what you shouldn’t do than what you need to. So here are the Top Ten Tips:

1.Don’t even be tempted just to attack your flooring with plenty of water and soap. If you do this, you can seriously damage the timber by accidentally leaving too much moisture on and between the boards.
2.Be tender with your planks — they are nude after all! It is never a fantastic idea to set about cleaning an unfinished flooring with any sharp or abrasive object.
3.Be cautious of products. Wood flooring cleaning products are (nearly ) as sophisticated as hair straighteners and choosing the right product usually means you’ll find a great result. If you use a cleaning product meant for lacquered or oiled wood flooring on your unfinished flooring, you could end up with nasty stains which are a nightmare to remove– so avoid this at all costs.

4.Purchase a Proper mop.
Should you use a conventional cotton mop, the odds are you’ll leave a whole lot more water in the floor than you need to. Using a moist microfibre mop with a light spritz of water from water spray, then you should not have any difficulties.
5.In a situation in which you have stains which are nearly impossible to remove, you should give the stained region a very light sanding. However, while this is an effective means to eliminate stains, it is not something you’d need to do too often, so book this choice as a last resort.
6.Get hoovering! Vacuuming is the very best method to keep your unfinished floor in top notch condition. Simply picking up all of the dust and dirt that’s sitting on the ground’s surface will reduce the demand for mopping and reduce the danger of damage significantly; so make sure you do it regularly.

7.Concentrateā€¦instead of thinking you need to handle your entire floor to get it blank, think again. Focusing in on clogs and dealing only with the region that’s filthy means that you can lessen your overall floor scrubbing significantly.
8.Be vigilant. One of the biggest dangers to unfinished wood flooring is spills. Being cautious means which you may get on top of spills whenever they occur. Clean them up with a soft fabric as early as humanly possible and you won’t need to take corrective action too frequently.
9.Invest in fantastic door mats. The best approach to prevent dust and dirt landing on and staying on your flooring is by buying a top quality outdoor door mat in addition to an absorbent and good-looking indoor one. When you’ve bought themencourage individuals to use them and if you possibly can; get them to take off their shoes!
10.Appreciate! Your floor is a natural and beautiful merchandise; take some time to relish it.

And needless to say, if everything else fails, the fantastic thing about unfinished hardwood floors is you could always choose to sand it and put in an end at a later date — that which additional floors alternative provides you that amount of flexibility and control? You are right — not one!

If you are concerned about your unfinished hardwood floors and can do with a specialist assisting hand, why don’t you get in contact? At Floor Sanding Acton We are always pleased to assist.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s